P R O D U C T S
1120-1750nm Laser
Precilasers has launched a single-frequency Raman fiber laser with an ultra-wide wavelength range of 1120–1750 nm, which fills the emission wavelength gap of rare-earth-doped fiber lasers. Based on Raman amplification technology, this series of single-frequency Raman lasers features a maximum output power of up to 30 W. The all-polarization-maintaining and all-fiber structure ensures the laser has characteristics such as a compact design, excellent long-term stability, and maintenance-free operation. Meanwhile, it guarantees extremely low intensity noise and phase noise of the output laser. Additionally, the laser boasts advantages including high power, low-noise amplification, and ultra-fast seed cutoff protection. It meets the requirements for lasers with special wavelengths in applications such as laser atomic cooling and laser spectroscopy.
Features
- High Power
- Narrow Linewidth
- Good Beam Quality
- Wide Wavelength Coverage Range
- Low Noise
- Seed Power Off Protection System
Application
- Optical Communications
- LiDAR
- Interferometry
- Frequency-Doubled Fundamental Source
- Mid-IR OPO Pumping
Main parameters
|
Specification |
|||
|
Partnumber |
FL-SF-X-Y-CW(1) |
||
|
Range |
1120nm-1340nm |
1340nm-1530nm |
1600nm-1750nm |
|
Output Power |
>1W/8W/30W |
>1W/5W/15W |
>1W/5W |
|
Typical wavelength |
1315nm，1389nm, 1651nm |
||
|
Relative Intensity Noise |
<1% (RMS, 10Hz-10MHz Integration) |
||
|
Power Stability |
<0.75% @3hours, RMS |
||
|
Power Tuning Range |
1-100% |
||
|
Output Mode |
Single Mode PM Fiber with FC/APCconnector（Output Power≤5W) OR Collimated Output |
||
|
Beam Diameter |
0.6±0.2mm |
||
|
Beam Quality |
TEM00，M²<1.1 |
||
|
Polarization |
Linear, >23dB |
||
|
Output Laser Isolation |
>25dB |
||
|
Cooling |
Air Cooling/ Water Cooling |
||
|
Operating Environment & Power Supply |
|||
|
Temperature |
15-30 ℃（Air Cooling） OR 15-35 ℃（Water Cooling） |
||
|
Power Supply |
100V-240V, AC, 50/60Hz |
||
|
Communication |
RS422 |
||
(1)X is the center wavelength，Y is the output power, if 15W 1340nm amplifier, the partnumber is FL-SF-1340-15-CW
Higher power, more wavelengths, customizable solutions
